The Avträk is our rotating audio visual rack solution designed for installation where space is at a premium and fit is critical.
It is mounted on slides that attach to the top and bottom of your enclosure using industrial strength 18 gauge steel brackets. It pulls out 480mm and then rotates 360 degrees for complete access to the back of your components.
Avträk comes complete with a front carriage cover plate for that clean look. Being constructed of the same material and with the same attention to detail as Avräk, Avträk will give you many years of trouble free operation. Velcro strips are mounted on the back of every adjustable shelf to assist in keeping wires organized.
Avträk is shipped fully assembled with all required mounting hardware.
- 1 year parts warranty.
- Always install your heaviest components at the bottom to ensure stability.
Keyed Carriage Lock
The Keyed Carriage Lock allows you to keep your Avträk locked down. This Avoption prevents your Avträk from being pulled out. This is ideal for installations requiring minimal security.
Avtrak Specifications
Unit Number |
Minimum Rough Opening
H X W X D |
Maximum Component Clearance |
Shelves* |
Weight Rating |
AT-1830 |
1830mm X 510mm X 470mm |
1400mm X 470mm W |
11 |
180 kg |
AT-1525 |
1525mm X 510mm X 470mm |
1155mm X 470mm W |
9 |
180 kg |
AT-1220 |
1220mm X 510mm X 470mm |
910mm X 470mm W |
7 |
135 kg |
AT-1065 |
1065mm X 510mm X 470mm |
780mm X 470mm W |
6 |
135 kg |
AT-915 |
915mm X 510mm X 470mm |
660mm X 470mm W |
5 |
135 kg |
AT-760 |
760mm X 510mm X 470mm |
540mm X 470mm W |
4 |
90 kg |
|
- When installing the Avträk in a cabinet with a door or next to a wall, you must allow 50mm minimum clearance between the Avträk and the door or the wall when the Avträk is fully extended to clear the hinges.
- When manufacturing the carcass to house the Avträk it is recommended to use a heavy duty base preferably constructed of plywood of minimum 18mm thickness to achieve optimal structural strength.
- Maximum Component Clearance (MCC) is the total height of all your components.
- MCC is calculated using 16mm shelf and 13mm air space.
- Standard rack/rail components will fit in Avrak Inc. racks as the rails are recessed 40mm.
- Custom heights up to 1830mm available.
- Specifications subject to change without notice.
- We recommended to install a ventilation fan in all Avträk and Avräk carcasses to prevent excessive heat build up.
* Bottom non-adjustable shelf included in shelf count.
** Optional 225 kg weight rating available.
*** The top rack must be mounted securely or the stability of the rack will be compromised.
Metric Key:
All content owned by Avrak Australia. Copyright 2007 www.avrak.com.au
|
